BTech GB-350/C Graffiti Clear Barrier

To protect surfaces from graffiti attack by providing a barrier between graffiti and the underlying surface to enable easy removal without damage to the substrate.

Painted or unpainted surfaces including concrete, stone, timber and brick. Highly porous surfaces such as rough stone, Hebel bricks, sandstone, limestone, rough concrete, cement and timber require sealing (see under Application below).

Clean and/or wash surface to remove any contaminates.

Seal highly porous surfaces with BTech Sealer for easy removal of graffiti from pits and voids (see BTech Sealer) and to ensure optimum coverage when applying the BTech Graffiti Barrier.

Apply with brush, roller or airless spray (can be applied to a damp surface but freshly painted surfaces must be completely dry before applying BTech Graffiti Barrier).

Note: Product appears milky in container but dries to a clear film. When applied with a roller, slightly dimpled surface may result with a low sheen. This will diminish with aging but not affect performance.

BTech Graffiti Barrier should be applied so as to provide a minimum dry film thickness of 60-100 microns.

To remove graffiti from a surface protected by BTech Graffiti Barrier, use a hot water pressure system. Recoat areas, which have been stripped as soon as possible to provide continuing protection.

10 litre